unisonic technologies co., ltd ucd4060b preliminary cmos ic www.unisonic.com.tw 1 of 9 copyright ? 2013 unisonic technologies co., ltd qw-r502-866.b cmos 14-stage ripple-carry binary counter/divider and oscillator ? description ucd4060b consists of an oscillator section and 14 ripple-carry binary counter stages. the oscillator configuration allows design of either r c or crystal oscillator circuits. a reset input is provided which resets the counter to t he all-o?s state and disables the oscillator. a high level on the r eset line accomplishes the reset function. all counter stages are mast er-slave flip-flops. the state of the counter is advanced one step in binary order on the negative transition of i and o. all inputs and outputs are fully buffered. schmitt trigger action on the input-pulse line permits unlimited input-pulse rise and fall times. ? features * 12mhz clock rate at 15v * common reset * fully static operation * buffered inputs and outputs * schmitt trigger input-pulse line ? oscillator features * all active components on chip * rc or crystal oscillator configuration * rc oscillator frequency of 690 khz min. at 15v ? applications * control counters * timers * frequency dividers * time-delay circuits sop-16 tssop-16 ? ordering information ordering number package packing lead free halogen free ucd4060bl-s16-r ucd4060bg-s16-r sop-16 tape reel ucd4060bl-s16-t ucd4060bg-s16-t sop-16 tube ucd4060bl-p16-r UCD4060BG-P16-R tssop-16 tape reel ucd4060bl-p16-t ucd4060bg-p16-t tssop-16 tube
ucd4060b preliminary cmos ic unisonic technologies co., ltd 2 of 9 www.unisonic.com.tw qw-r502-866.b ? pin configuration ? logic diagram
ucd4060b preliminary cmos ic unisonic technologies co., ltd 3 of 9 www.unisonic.com.tw qw-r502-866.b ? absolute maximum rating (t a =25c, unless otherwise specified) parameter symbol ratings unit supply voltage v dd -0.5 ~ 20 v input voltage v in -0.5 ~v cc +0.5 v output voltage v out -0.5 ~v cc +0.5 v input clamp current (v in <0, or v in >v dd ) i ik 10 ma power dissipation t a =-40c~+85c p d 500 mw operating temprature t opr -40~+85 c storage temperature t stg -65~+150 c notes: 1. the input and output voltage ratings may be exce eded if the input and output current ratings are observed. 2. absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? thermal data parameter symbol ratings unit junction to ambient sop-16 ja 90 c/w tssop-16 110 ? recommended operating comditions parameter symbol conditions min tpy max unit supply voltage v dd 3 18 v input-pulse width t w v dd =5v 100 ns v dd =10v 40 v dd =15v 30 input-pulse frequency f i v dd =5v 3.5 mhz v dd =10v 8 v dd =15v 12 input-pulse rise and fall time t r / t f v dd =5v unlimited s v dd =10v v dd =15v reset pulse width t w v dd =5v 120 ns v dd =10v 60 v dd =15v 40
ucd4060b preliminary cmos ic unisonic technologies co., ltd 4 of 9 www.unisonic.com.tw qw-r502-866.b ? electrical characteristics (t a =25c, unless otherwise specified) parameter symbol conditions min tpy max unit quiescent supply current i cc v in =0, 5v, v dd =5v 0.04 5 a v in =0, 10v, v dd =10v 0.04 10 v in =0, 15v, v dd =15v 0.04 20 v in =0, 20v, v dd =20v 0.08 100 output low (sink) current i ol v out =0.4v, v in =0, 5v, v dd =5v 0.51 1 ma v out =0.5v, v in =0, 10v, v dd =10v 1.3 2.6 v out =1.5v, v in =0, 15v, v dd =15v 3.4 6.8 output high (source) current i oh v out =4.6v, v in =0, 5v, v dd =5v -0.51 -1 ma v out =2.5v, v in =0, 5v, v dd =5v -1.6 -3.2 v out =9.5v, v in =0, 10v, v dd =10v -1.3 -2.6 v out =13.5v, v in =0, 15v, v dd =15v -3.4 -6.8 output voltage: low-level v ol v in = 0, 5v, v dd =5v 0 0.05 v v in = 0, 10v, v dd =10v 0 0.05 v in = 0, 15v, v dd =15v 0 0.05 output voltage: high-level v oh v in = 0, 5v, v dd =5v 4.95 5 v v in = 0, 10v, v dd =10v 9.95 10 v in = 0, 15v, v dd =15v 14.95 15 input low voltage v il v out =0.5, 4.5v, v dd =5v 1.5 v v out =1, 9v, v dd =10v 3 v out =1.5, 13.5v, v dd =15v 4 input high voltage v ih v out =0.5, 4.5v, v dd =5v 3.5 v v out =1, 9v, v dd =10v 7 v out =1.5, 13.5v, v dd =15v 11 input leakage current i i ( leak ) v in =0, 18v, v dd =18v 10 -5 0.1 a ? switching characteristics (t a =25c, input t r / t f =20ns, c l =50pf, r l = 200k ? ) parameter symbol conditions min tpy max unit clocked operation propagation delay time i to q4 t plh / t phl v dd =5v 370 740 ns v dd =10v 150 300 v dd =15v 100 200 propagation delay time qn to qn+1 t plh / t phl v dd =5v 100 200 ns v dd =10v 50 100 v dd =15v 40 80 transition time t thl / t tlh v dd =5v 100 200 ns v dd =10v 50 100 v dd =15v 40 80 maximum input-pulse frequency f i v dd =5v 3.5 7 mhz v dd =10v 8 16 v dd =15v 12 24 minimum input-pulse width t w v dd =5v 50 100 ns v dd =10v 20 40 v dd =15 15 30 input-pulse rise and fall time t r / t f v dd =5v unlimited v dd =10v v dd =15v average input capacitance c i any input 5 7.5 pf
ucd4060b preliminary cmos ic unisonic technologies co., ltd 5 of 9 www.unisonic.com.tw qw-r502-866.b ? switching characteristics(cont.) parameter symbol conditions min tpy max unit reset operation propagation delay time t plh / t phl v dd =5v 180 360 ns v dd =10v 80 160 v dd =15v 50 100 minimum reset pulse width t wr v dd =5v 60 120 ns v dd =10v 30 60 v dd =15 20 40 rc operation variation of frequency c x =200pf, r s =560k ? , r x =50k ? v dd =5v 2310% khz v dd =10v 2410% v dd =15v 2510% variation of frequency with voltage change c x =200pf, r s =560k ? , r x =50k ? v dd =5v~10v 1.5 khz v dd =10v~15v 0.5 r x max c x =10 f, v dd =5v 20 m ? c x =50 f, v dd =10v 20 c x =10 f, v dd =15v 10 c x max r x =500k ? , v dd =5v 1000 f r x =300k ? , v dd =10v 50 r x =300k ? , v dd =15v 50 maximum oscillator frequency c x =15pf, r s =30k ? , r x =5k ? v dd =10v 530 650 810 khz v dd =15 690 800 940 drive current at pin 9 i ol v o =0.4v, v dd =5v 0.16 0.35 ma v o =0.5v, v dd =10v 0.42 0.8 v o =1.5v, v dd =15 1 2 i oh v o =4.6v, v dd =5v -0.16 -0.35 ma v o =9.5v, v dd =10v -0.42 -0.8 v o =13.5v, v dd =15 -1 -2
ucd4060b preliminary cmos ic unisonic technologies co., ltd 6 of 9 www.unisonic.com.tw qw-r502-866.b ? test circuit and waveforms fig. 1 test circuit inputs v m v load c l r l v in t r , t f v cc 20 ns v cc /2 v cc 50 pf 200 k ? v dd 0v input 10% 90% t r 10% 90% t f v in 0v v oh v ol input output t plh t phl v oh v ol output v m 10% 90% 10% 90% 10% 90% 10% 90% v m v m v m t phl t plh v m v m t f t r t r t f notes: 1. c l includes probe and jig capacitance. 2. all input pulses are supplied by generator s having the following characteristics: prr 1mhz, z o = 50 ? . test s1 t plh /t phl gnd
ucd4060b preliminary cmos ic unisonic technologies co., ltd 7 of 9 www.unisonic.com.tw qw-r502-866.b ? test circuit and waveforms(cont.) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 i c l 500uf v dd c l pulse generator fig. 4 dynamic power dissipation test circuit 12 reset 9 10 11 c x r s r x fig. 5 typical rc circuit
ucd4060b preliminary cmos ic unisonic technologies co., ltd 8 of 9 www.unisonic.com.tw qw-r502-866.b ? test circuit and waveforms(cont.) i v dd v ss inputs v ss v dd fig. 6 quiescent device current test circuit fig. 7 input voltage test circuit
ucd4060b preliminary cmos ic unisonic technologies co., ltd 9 of 9 www.unisonic.com.tw qw-r502-866.b ? test circuit and waveforms(cont.) fig. 8 input current test circuit note measure inputs sequentially, to both v dd and v ss ; connect all unused inputs to either v dd or v ss . utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
